Soudagum Hydro Kit

• Ready to use, single-component waterproof coating

• Solvent and Isocyanate free

• Excellent workability, can be applied in 2 layers

• Rain resistant 2 hours after application

• Excellent ahesion on most common substrates

• Good UV and weather resistance

• Paintable

For both indoor and outdoor applications where a protective waterproof coating is required. Suitable for the waterproofing of skylights, dome lights, pipe collars and wall breakthroughs. Waterproofing and repair of roofs and metal/plastic guttering. Repair and renovation of rooftops (pans, slats, zinc), roof edges and chimney flashings. Treatment of lead and zinc corrosion. For protection and renovation of wooden constructions, including underground garden structures to protect against exposure to moisture.

Surfaces must be free of dust and grease. Remove all traces of loose existing coating material. Stir Soudagum Hydro in the container before using. Apply by roller or brush in 2 layers to a thickness of 2mm. The second layer cannot be applied until the first has dried completely. The membrane can be reinforced with a non-woven fleece (Soudatextile). If so, it’s recommended to be used between two coats. The fleece should be submerged into the first coat while it is still wet.